Our company produces billets of reprocessed fluoroplast-4 and of compositions on its basis in accordance to technical specification 6-05-1088. The consumer properties of articles made of reprocessed Ф-4 are nearly equivalent to those of articles produced of fresh Ф-4 which enables substitution of the latter articles by the former ones (except for operation involving extra-pure media) and saving up to 40% of expenses, without losing the unique properties of fluoroplasts.
Material properties:
Density, g/cm2not lower than 2.16
Tensile strength, MPa (kgf/cm2) not lower than 11.7 (117)
Elongation at break, % not lower than 217
Electric strength, kW/mm not lower than 35
Range of service temperatures from – 60 to + 260 °C
Appearance light-grey, single small dark inclusions are possible.
| Pressed plates ofФ-4 Technical specification 6-05-1088 | ||
| Width, mm | Length, mm | Thickness, mm |
| 300±10.0 | 300±10.0 | 1…60±0.5 |
| 500±15.0 | 500±15.0 | 1… 4.5±5.0 |
| 340±5.0 | 630±10.0 | 45... 100±5.0 |
| 680±20.0 | 890±20.0 | 25... 60±5.0 |
| 800±20.0 | 660±20.0 | 10±1.0 |
| 800±20.0 | 730±20.0 | 10±1.0 |
| 800±20.0 | 830±20.0 | 10±1.0 |
| 1000±20.0 | 330±20.0 | 20±3.0 |
| 1100±50.0 | 280±10.0 | 25±2.0 |
| 1200 | 300 | 35 |
| 2100 | 280 | 60 |
| Extruded rods ofФ-4 Technical specification 6-05-1088 | ||
| Diameter, mm | Height, mm | Weight, g |
| 15±1,5 | 1000±20 | 450 |
| 20±2 | 1000±20 | 800 |
| 25±2 | 1000±20 | 1 170 |
| 30±2 | 1000±20 | 1 660 |
| 35±2 | 1000±20 | 2 200 |
| 40±3 | 1000±20 | 3 000 |
| 50±3 | 1000±20 | 4 670 |
| 60±3 | 1000±20 | 6 700 |
| 70±3 | 1000±20 | 9 400 |
| 80±3 | 1000±20 | 11 700 |
| 90±3 | 1000±20 | 14 000 |
| 100±3 | 1000±20 | 17 900 |
| Vertically pressed rods ofФ-4 Technical specification 6-05-1088 | ||
| Diameter, mm | Height, mm | Weight, g |
| 120 | 80 | 2 080 |
| 150±4 | 60±5 | 2 530 |
| 180±5 | 60±5 | 3 750 |
| 210±5 | 60±5 | 4 600 |
| 250 | 100 | 12 000 |
| 300 | 100 | 17 900 |
| 350±5 | 60±5 | 13 000 |
| 350 | 100 | 24 000 |
| 400±10 | 100±10 | 29 750 |
| 500±10 | 60±5 | 25 800 |
| 500 | 100 | 49 000 |
| 520±10 | 50±5 | 25 350 |
| 600 | 70 | 45 100 |
| 880 | 50 | 71 000 |
| Pressed bushings ofФ-4 Technical specification 6-05-1088 | |||
| Outer diameter, mm | Inside diameter, mm | Height, mm | Weight, g |
| 56±1.0 | 39±1.0 | 1000±20.0 | 2880 |
| 80±5.0 | 42-2.0 | 205±5.0 | 1870 |
| 95±5.0 | 75-2.0 | 140±10.0 | 1100 |
| 105±3.0 | 70-3.0 | 250±10.0 | 3200 |
| 110±3.0 | 40±2.0 | 600±10.0 | 10900 |
| 135±5.0 | 75-5.0 | 235±10.0 | 5300 |
| 140±3.0 | 125-3.0 | 290±5.0 | 2400 |
| 150±3.0 | 125-3.0 | 290±10.0 | 4050 |
| 175±3.0 | 125-5.0 | 290±10.0 | 8250 |
| 180±5.0 | 75-2.0 | 500-10.0 | 25250 |
| 185 | 56 | 300 | 15700 |
| 185±5.0 | 125-5.0 | 290±10.0 | 10700 |
| 200±3.0 | 165-3.0 | 145±5.0 | 3100 |
| 220±5.0 | 75-5.0 | 220±10.0 | 16600 |
| 220±5.0 | 146-5.0 | 220±10.0 | 11720 |
| 225±5.0 | 190-5.0 | 140±5.0 | 4400 |
| 230±5.0 | 165-5.0 | 140±5.0 | 5850 |
| 235±5.0 | 200-4.0 | 210±5.0 | 6050 |
| 240±5.0 | 146-5.0 | 300±5.0 | 18700 |
| 240±5.0 | 158-5.0 | 765±5.0 | 43690 |
| 240±5.0 | 170-5.0 | 755±5.0 | 38600 |
| 240 | 200 | 500 | 19600 |
| 250-10.0 | 120-5.0 | 300-5.0 | 24500 |
| 250 | 230 | 300 | 6300 |
| 255±10.0 | 200-5.0 | 220-10.0 | 10850 |
| 270 | 190 | 180 | 1105 0 |
| 280±10.0 | 200-10.0 | 300±10.0 | 23100 |
| 280±10.0 | 225-10.0 | 300±10.0 | 19400 |
| 295±5.0 | 190-5.0 | 145±5.0 | 14370 |
| 295±5.0 | 270-5.0 | 140±10.0 | 6540 |
| 325±5.0 | 120±5.0 | 330±10.0 | 50000 |
| 330±5.0 | 210-5.0 | 300±10.0 | 32900 |
| 340±5.0 | 110-5.0 | 230±10.0 | 43800 |
| 360 | 300 | 60 | 8850 |
| 405±5.0 | 355-5.0 | 295±10.0 | 23150 |
| 445±5.0 | 380-5.0 | 310±10.0 | 35500 |
| 445±5.0 | 250-5.0 | 275±10.0 | 61400 |
| 485±5.0 | 355±5.0 | 240±10.0 | 52500 |
| 575±5.0 | 505-5.0 | 75-5.0 | 11000 |
| 965±10.0 | 900-10.0 | 75±5.0 | 18500 |
| Skived tape ofФ-4 Technical specification 6-05-1088 | ||
| Width, mm | Length, mm | Thickness, mm |
| 40…300 | up to 3000 | 1…6 |
| 40…500 | up to 2000 | 1…6 |
| 40…600 | up to 2000 | 1…6 |
We are ready to consider the possibility of manufacturing of articles having other nominal dimensions of reprocessed fluoroplast, as close to part dimensions as practicable. We can also produce various dimensionally accurate articles of fluoroplast according to customer’s drawings.